Fully synthetic contact protection fluid

Examples of Application
·  Provides contact protection and lubrication of all kinds of plugged connections, push buttons, relays, potentiometers, selector and slide switches and above all switches for control current
·  For currents from 1 mA to 500 mA

Material combinations
·  Plastic / plastic
·  Plastic / metal
·  Metal / metal
·  Silver / gold alloys
·  Palladium

·  High oxidation resistance
·  Very good compatibility with plastic
·  Increases contact life
·  Long life lubrication
·  Reduction of friction and wear
·  After evaporation of the solvent an extremely thin oil film is left that offers hardly any contact resistance

Characteristic data
·  Service temperature : -40 °C to +250 °C
·  Appearance : colorless, transparent


Characteristic data after evaporation of solvent

Kin. viscosity of the active substance at 40 °C

mm2/s approx. 325

DIN 51562

Density of the active substance at 20 °C

g/cm3 approx. 1.91

DIN 51757


Instructions for use

·  Dip lubrication e.g. by using sieve baskets.

·  All other friction surfaces such as plastic rails, shifting gates, cardioid curves, etc. obtain best possible lubricating film by dip lubrication. Dip tanks have to be well covered and equiped with a corresponding cooling device in order to avoid increase loss of solvent. In case of solvent loss BECHEM Verdünner OZF hast to be added

·  Prior to serial production compatibility tests are recommended.

Also available :

·  Berutox VPT 64 Dispersion OZF 0.5, OZF 5, OZF 10, OZF 20 und OZF 25

The optimal storage temperature is between 5 °C and 30 °C