BECHEM BERUFORGE 393 G

Lubricant for massive forming

Examples of Application
·  Die forging
·  Upsetting and forging

Material
·  Non-ferrous metals
·  Steel
·  Aluminium
·  Copper alloys

Properties
·  Wear protection
·  Good release effect
·  Graphite poor

Characteristic data
·  Service temperature : +120 °C to +300 °C
·  Appearance : black

 

Evaporation residue

 % 17.5 – 20

AA_003-153

Density at 20 °C

 g/cm3 1.07 – 1.09

AA_003-9 acc. to DIN 51757

Efflux time at 25 °C

 s 40 – 80

AA_003-121 acc. to DIN ISO 2431/4

pH value

 8.5 – 11.4

DIN 51369

 

Instructions for use

·  Applied on the tools by suitable spraying systems, best by fine atomization

·  After spraying and drying a waxy effective layer remains on the tool which provides good lubricating and release effect during the forming process

·  Depending on the requirements and severity of the forming process, it should be mixed with water in a ratio from 1:5 up to 1:15

·  Storage: Container to be stored under dry and frost protected conditions. Temperature range +5 °C to +50 °C

Views: 4